EMC clamp assembly for 35 mm top hat DIN rail, pluggable
with integrated strain relief
EMC clamp assemblies are used, where the shield of several cables must be connected to the earth potential. They are easy to use and enable effective earthing and strain relief of up to 12 cables in a small space. There are different carriers available which can be user configured with up to 12 SKL or MSKL shield clamps. The shield clamps are mounted directly on the surface of the clamp assembly which guarantees a tight fit.
The cables can be fixed via the cable jacket using cable ties. Thus strain relief in accordance with EN 62444 is achieved.
The EMC shield clamps as listed below are available to mount:
SKL 1.5-3 | SKL 3-6 | SKL 6-8 | SKL 8-11
The SKL shield clamps are assembled in a row which enables an ideal and space-saving arrangement.
The clamp assembly can be easily attached by snapping them onto 35 mm top hat DIN rails.
Configure your individual clamp assembly with the icotek EMC Configurator!
Part No.
38140
Specifications
Properties
vibration proof
Advantages and benefits
Large contact area
Shield contact and strain relief separated
Easy assembly and removal
The spring design requires no adjustments and will permanently maintain contact to the cable shield
Shock and vibration resistant, maintenance free
Designed for high density applications
Possibility to configure custom specific EMC clamp assemblies
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
.png)
EMC clamp assemblies are used, where the shield of several cables must be connected to the earth potential. They are easy to use and enable effective earthing and strain relief of up to 12 cables in a small space. There are different carriers available which can be user configured with up to 12 SKL or MSKL shield clamps. The shield clamps are mounted directly on the surface of the clamp assembly which guarantees a tight fit.
The cables can be fixed via the cable jacket using cable ties. Thus strain relief in accordance with EN 62444 is achieved.
The EMC shield clamps as listed below are available to mount:
SKL 1.5-3 | SKL 3-6 | SKL 6-8 | SKL 8-11
The SKL shield clamps are assembled in a row which enables an ideal and space-saving arrangement.
The clamp assembly can be easily attached by snapping them onto 35 mm top hat DIN rails.
Configure your individual clamp assembly with the icotek EMC Configurator!